文章摘要
高艳飞,陈广学.有机硅改性聚氨酯胶粘剂的研究[J].包装工程,2014,35(17):61-64,101.
GAO Yan-fei,CHEN Guang-xue.Polyurethane Adhesives Modified by Polysilicone[J].Packaging Engineering,2014,35(17):61-64,101.
有机硅改性聚氨酯胶粘剂的研究
Polyurethane Adhesives Modified by Polysilicone
投稿时间:2013-12-23  修订日期:2014-09-01
DOI:
中文关键词: 胶粘剂  羟基硅油  聚氨酯  吸水率
英文关键词: adhesive  hydroxy silicone oil  polyurethane  water absorption rate
基金项目:
作者单位
高艳飞 中山火炬职业技术学院 中山 528437
华南理工大学制浆造纸工程国家重点实验室 广州 510640 
陈广学 华南理工大学制浆造纸工程国家重点实验室 广州 510640 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 合成一种抗水性良好的无溶剂聚氨酯胶粘剂 。 方法 采用聚酯多元醇(PBA)、异佛尔酮二异氰酸酯(IPDI)、蓖麻油和羟基硅油为原料, 合成出一系列有机硅改性聚氨酯胶粘剂 , 并用红外光谱分析仪、热重分析仪对反应产物进行分析。 同时考察不同羟基硅油的添加量对胶粘剂固化时间、固化膜吸水性、粘结性能等的影响。 结果 适量添加羟基硅油可以有效提高胶粘剂的粘接强度、耐热性和耐水性, 但是羟基硅油添加量过多会延长预聚体的合成时间。 结论 羟基硅油添加的质量分数为 3%~4%时最佳。
英文摘要:
      Objective To synthesize a solvent-free polyurethane adhesive with high water resistance. Methods A series of polyurethane adhesives modified by polysilicone were synthesized using PBA, IPDI, castor oil and hydroxy silicone oil as materials. The chemical structure was characterized by FT-IR analysis and thermogravimetric analysis. Influences of different ratios of polysilcone on curing time, adhesion strength and water resistance were well discussed.Results The addition of proper amount of polysilicone could enhance the bonding strength, thermostability and water resistance. But overdose of polysilicone prolonged the reaction time of the pre-polymer. Conclusion The content of polysilicone should be controlled within 3%~4%.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20788862位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号