郑西龙,赵秀萍.固化条件对丝印 RFID 天线导电性能的影响[J].包装工程,2014,35(15):128-131.
ZHENG Xi-long,ZHAO Xiu-ping.Influence of Curing Conditions on the Conductivity of Antenna of RFID Printed by Screen Printing[J].Packaging Engineering,2014,35(15):128-131. |
| 固化条件对丝印 RFID 天线导电性能的影响 |
| Influence of Curing Conditions on the Conductivity of Antenna of RFID Printed by Screen Printing |
| 投稿时间：2014-04-07 修订日期：2014-08-01 |
| DOI： |
| 中文关键词: RFID 天线 固化时间 固化温度 电阻 |
| 英文关键词: antenna of RFID curing time curing temperature resistance |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 为了优化丝网印刷 RFID 天线的固化条件。 方法 通过正交实验对固化时间和固化温度进行探讨和分析， 并运用隧道势垒模型对天线电阻的温度特性进行解释。 分析不同的固化时间和固化温度组合对 RFID 天线导电性能的影响。 结果 随着固化时间的增加和固化温度的增大， 天线电阻都是先减小后增大。 结论 固化时间为 20 min， 固化温度为 150 ℃时， RFID 天线的线条清晰， 边缘平滑，无粘连，天线的平均电阻值最小，导电性能最佳。 |
| 英文摘要: |
| Objective To optimize the curing conditions of antenna of RFID (Radio Frequency Identification) printed by screen printing. Methods Curing time and curing temperature were discussed and analyzed through orthogonal experiment in this research, the temperature characteristics of antenna’ s resistance was explained using the tunneling barrier model. We analyzed the influence of different curing time and curing temperature on the conductivity of antenna of RFID. Results With the increase of curing time and curing temperature, the resistance of antenna was decreased at first and then increased. Conclusion When the curing time was 20 minutes and the curing temperature was 150 ℃ , the lines of the antenna of RFID were clear, the edge was smooth and there was no adhesion, the average resistance of the antenna was the smallest, and the conductivity was the optimal. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号