李文霞,司占军,顾翀.胶印机虚拟定位装置的仿真研究[J].包装工程,2014,35(9):127-131.
LI Wen-xia,SI Zhan-jun,GU Chong.Simulation Study on Virtual Positioning Device for Offset Printing[J].Packaging Engineering,2014,35(9):127-131. |
| 胶印机虚拟定位装置的仿真研究 |
| Simulation Study on Virtual Positioning Device for Offset Printing |
| 投稿时间：2013-10-24 修订日期：2014-05-01 |
| DOI： |
| 中文关键词: J2205 虚拟现实 数字模型 SolidWorks VRML |
| 英文关键词: J2205 virtual reality digital model SolidWorks VRML |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 借助虚拟现实技术对 J2205 北人对开双色胶印机定位装置进行改装。 方法 首先对J2205 进行实地考察,确定改装方案,并对其结构进行划分,然后利用 SolidWorks 作为建模工具建立胶印机数字化模型,VRML 虚拟现实建模语言作为输出交互工具发布到网页上,并验证改装后的 J2205性能。 结果 结合无侧规技术成功实现了胶印机的虚拟改装,改装后的 J2205 节约了 25% 的纸张轴向定位时间,定位更加准确,能够提高套印精度。 结论 J2205 胶印机虚拟定位装置的改装能够对印刷机进行反复改装,降低了生产成本,并可利用传感器进行定位,充分发挥其智能作用。 |
| 英文摘要: |
| Objective To modify the positioning device for the J2205 double-color folio offset printer with the help of virtual reality. Methods First the J2205 offset printer was investigated on the spot, then the modification methods were determined and finally its structure was partitioned. SolidWorks was then used as the modeling tool to set up digital model for the offset printer, and the virtual reality modeling language VRML was employed as the interactive tool to output model on webpage. And the properties of the modified J2205 were verified. Results The results showed that virtual modification of offset printer was achieved in combination with non-lateral guide technology, and the modified J2205 saved 25% axial positioning time. It improved the accuracy of positioning and overprinting. Conclusion The virtual positioning device of J2205 could be modified repeatedly, which reduced the production cost. The position sensor could be used to help the full performance of the intelligent machine. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号