文章摘要
张跃明,谢建平.解析 JDF 文档实现油墨预置技术的研究[J].包装工程,2014,35(7):109-113.
ZHANG Yue-ming,XIE Jian-ping.Technique of Realizing Ink Key Presetting by Analyzing JDF Document[J].Packaging Engineering,2014,35(7):109-113.
解析 JDF 文档实现油墨预置技术的研究
Technique of Realizing Ink Key Presetting by Analyzing JDF Document
投稿时间:2013-11-09  修订日期:2014-04-01
DOI:
中文关键词: Visual C++  JDF  网点面积率  最小二乘法  油墨预置
英文关键词: Visual C++  dot area ratio  JDF  least squares  ink key presetting
基金项目:
作者单位
张跃明 北京工业大学 北京市先进制造技术重点实验室, 北京 100124 
谢建平 北京工业大学 北京市先进制造技术重点实验室, 北京 100124 
摘要点击次数:
全文下载次数:
中文摘要:
      目的 实现 CIP4 油墨预置功能。 方法 通过 Visual C + + 6 . 0 平台,提取 JDF 文档中根结点下资源池结点“ ResourcePool冶 中的墨区设置框架“ InkZoneProfile 冶 所包含的油墨预置信息。 根据 JDF 文档的结构特点,采用定位关键信息、忽略次要信息的解析思路,通过实验得到网点面积率和墨键开度的关系,并运用最小二乘法建立拟合曲线。 最后运用插值法将解析 JDF 文档获得的网点面积率转换为墨键开度值。 结果 实验证明该技术得到的墨区墨键值,只需要操作工人做微小的调整,即可得到满意的印刷成品。 结论 此项技术对于印刷效率的提高有极大的帮助。
英文摘要:
      Objective To realize the function of CIP4 ink key presetting. Methods Visual C + + 6. 0 platform was used to extract the ink key presetting information from the ink zone settings framework of " InkZoneProfile" node in the JDF document root resource pool node " ResourcePool " . According to the structural feature of JDF document, a solution of ignoring minor message and positioning key information was adopted. The relationship of dot area ratio and ink key value was obtained by experiments and a fitting curve was established using least squares. Interpolation method was used to convert the dot area from the JDF document to ink key value. Results Experimental results showed that satisfactory printing product can be obtained after fine adjustment in the ink key value of ink zone obtained by this technique. Conclusion This technique is obviously beneficial for improving the printing capacity.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20808970位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号