张承革,石友强,郭睦基,孙强.新型木塑复合材料及其制备方法研究[J].包装工程,2014,35(3):137-142.
ZHANG Cheng-ge,SHI You-qiang,GUO Mu-ji,SUN Qiang.A New Type of Wood-plastic Composite Material and Its Preparation Method[J].Packaging Engineering,2014,35(3):137-142. |
| 新型木塑复合材料及其制备方法研究 |
| A New Type of Wood-plastic Composite Material and Its Preparation Method |
| 投稿时间：2013-11-01 修订日期：2014-01-01 |
| DOI： |
| 中文关键词: 新型木塑复合材料 配方 制备方法 研究 |
| 英文关键词: new type of wood-plastic composite material formula preparation method research |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 目的 研制一种新型木塑复合材料。 方法 采用对比试验及验证试验,合理设计新型木塑复合材料的配方及其制备方法。 结果 确定了新型木塑复合材料的最佳配方和最优的制备方法及工艺参数( 板材厚度为 12 mm,混料加热温度为 80 ~ 90 ℃ ,冷却水的温度为 3 ~ 8 ℃ ) 。 结论 研制成功的新型木塑复合材料具有抗静电、阻燃防火、附着力强、防潮、防水、防虫、防霉、耐腐蚀、强度高、韧性好、耐老化、缓冲性能好、表面光滑、质量轻、木质感强、无污染、价格低等优良性能,适合印刷标志。 |
| 英文摘要: |
| Objective To develop a new type of wood-plastic composite material. Methods The formula and the preparation method of a new type of wood-plastic composite material were reasonably designed by comparison test and verification test. Results The optimal formula of a new type of wood- plastic composite material and the most optimized preparation method and technological parameters ( plate thickness: 12 mm, heating temperature of material mixing: 80 ~ 90 ℃ , temperature of cooling water: 3 ~ 8 ℃ ) were determined. Conclusion The new type of wood-plastic composite material was anti-static, fire-proofing, moisture proof, water proof, insect preventing, mould proof, and had strong adhesive force, high corrosion resistance,high strength, good tenacity, high aging resistance, good buffering effects, smooth surface, light weight , good woody performance , with no pollution and low cost, and is therefore suitable for printing marks. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号