文章摘要
严敏,陈安军.斜支承弹簧系统跌落冲击响应及影响因素分析[J].包装工程,2013,34(23):68-71.
YAN Min,CHEN An-jun.On Dropping Shock Response and Influencing Factors of Tilted Support Spring System[J].Packaging Engineering,2013,34(23):68-71.
斜支承弹簧系统跌落冲击响应及影响因素分析
On Dropping Shock Response and Influencing Factors of Tilted Support Spring System
投稿时间:2013-04-18  修订日期:2013-12-10
DOI:
中文关键词: 斜支承系统  数值分析  跌落冲击  响应峰值
英文关键词: tilted support system  numerical analysis  dropping impact  peak response
基金项目:
作者单位
严敏 江南大学, 无锡214122 
陈安军 1. 江南大学, 无锡214122
2. 国家轻工业包装制品质量监督检测中心, 无锡214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以斜支承弹簧系统为研究对象,建立了跌落冲击条件下系统无量纲非线性动力学方程。利用龙格-库塔数值分析方法求解动力学方程,讨论了无量纲跌落冲击速度、系统支承角及阻尼等对系统响应的影响。研究表明,随着无量纲跌落冲击速度的增加,系统位移响应峰值和加速度响应峰值增加;随着支承角的减小,位移响应峰值增大,加速度响应峰值减小;阻尼对系统响应影响显著,对系统加速度峰值影响存在最佳阻尼比,最佳阻尼比随系统支承角减小而减小。通过适当地选取阻尼比及支承角可有效地改善系统的抗冲击能力。
英文摘要:
      Dimensionless nonlinear vibration equations of tilted support spring system under dropping condition were established. The dynamic equations were solved by using Runge-Kutta method. The influence of dimensionless dropping impact speed, the support angle of system, and damping ratio on the system response were discussed. The result showed that the maximum shock response displacement and the maximum shock response acceleration increases with increasing of dimensionless dropping impact speed; with decreasing of support angle, the maximum shock response displacement increases and the maximum shock response acceleration decreases; damping ratio has significant influence on the system response and optimum damping ratio exists for the maximum shock response acceleration, which decrease with decrease of support angle. It was concluded that impact resistance of system can be enhanced effectively by suitable selection of damping and the angle of the system.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20791019位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号