文章摘要
王雪芬,陆佳平.充气袋承载与缓冲特性的试验研究[J].包装工程,2013,34(19):55-58.
WANG Xue-fen,LU Jia-ping.Loading and Cushioning Performance of Air Filled Bag[J].Packaging Engineering,2013,34(19):55-58.
充气袋承载与缓冲特性的试验研究
Loading and Cushioning Performance of Air Filled Bag
投稿时间:2013-07-25  修订日期:2013-10-10
DOI:
中文关键词: 充气袋  承载  缓冲性能  静态压缩
英文关键词: air-filled bag  bearing capacity  cushioning  static compression
基金项目:
作者单位
王雪芬 江南大学, 无锡214122 
陆佳平 江南大学, 无锡214122 
摘要点击次数:
全文下载次数:
中文摘要:
      针对影响充气袋包装基本特性的几个因素,如薄膜材料厚度、初始充气压力、结构尺寸,通过准静态压缩试验测定了其承载-变形特征,分析了各因素对充气袋的承载与缓冲特性的影响,为充气袋的结构设计与优化提供了依据。结果表明,充气袋承载力随着薄膜厚度、气室宽度和充气压力的增加均有所提高;多个气柱与单个气柱的承载力近似呈线性关系;充气袋具有良好的缓冲性能,不同因素对气柱最小缓冲系数影响不大。
英文摘要:
      Static compression experiments were carried on the air-bags with different material thicknesses, different initial air pressure, and different structure sizes to measure the loading-deformation characteristics. The factors influencing loading and cushioning characteristics were analyzed. The result showed that air-bags' bearing capacity increases with the film's thickness, gas pressure and gas cell's size increase; bearing capacity of multiple gas column is approximate linear relation with that of single gas column; air filled bag has good cushioning feature and cushioning coefficient is basically not influenced by the factors.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20792988位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号