田野,赵雪微,智慧,张莉,杨飞,丁亮,邓宗全.新型转轮式红酒包装结构设计及其跌落有限元分析[J].包装工程,2013,34(19):51-54. TIAN Ye,ZHAO Xue-wei,ZHI Hui,ZHANG Li,YANG Fei,DING Liang,DENG Zong-quan.Design of Propeller Type Red Wine Packaging Structure and Drop Finite Element Analysis[J].Packaging Engineering,2013,34(19):51-54. |
新型转轮式红酒包装结构设计及其跌落有限元分析 |
Design of Propeller Type Red Wine Packaging Structure and Drop Finite Element Analysis |
投稿时间:2013-06-25 修订日期:2013-10-10 |
DOI: |
中文关键词: 红酒包装 转轮式 有限元分析 跌落 |
英文关键词: red wine packaging propeller finite element analysis drop test |
基金项目:黑龙江省教育厅科技项目(12531165) |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
针对目前市场上单一的红酒包装结构,提出了一种新型转轮式包装结构。通过计算得到了转轮式包装结构尺寸,并采用Pro/ E 软件对其进行了三维建模,导入到ANSYS/ LS-DYNA 环境中进行了跌落状态仿真模拟。通过仿真模拟结果与产品脆值的对比分析,对转轮包装结构进行了优化。 |
英文摘要: |
A new propeller type packaging structure for red wine was put forward aiming at the single packaging structure on the market. Sizes of the propeller type packaging structure were obtained by calculation. 3D modeling of the packaging structure was established using Pro/ E software. Drop simulation was carried out by introducing to 3D model into ANSYS/ LS-DYNA environment. The packaging structure was optimized through comparing simulation results with the product fragility analysis. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|