文章摘要
吕明珠.热敏 CTP 制版质量控制参数的优化[J].包装工程,2013,34(15):142-145.
LYU Ming-zhu.Optimization of Quality Control Parameters of Thermal CTP System[J].Packaging Engineering,2013,34(15):142-145.
热敏 CTP 制版质量控制参数的优化
Optimization of Quality Control Parameters of Thermal CTP System
投稿时间:2013-03-19  修订日期:2013-08-10
DOI:
中文关键词: 热敏CTP  制版质量  曝光参数  显影条件
英文关键词: thermal CTP  plate making quality  exposure parameter  developing condition
基金项目:中央财政支持高等职业学校提升专业服务产业发展能力
作者单位
吕明珠 安徽新闻出版职业技术学院, 合肥230601 
摘要点击次数:
全文下载次数:
中文摘要:
      运用正交实验设计法,结合实际应用情况,选择影响热敏CTP 制版质量的主要参数,即激光发光功率、显影温度、显影时间等,进行了曝光参数和显影条件优化组合的实验。实验结果表明,在各个影响因素之中,激光发光功率对于热敏CTP 系统的制版质量影响最大,显影液温度和显影速度次之;通过实验还得到了一组实验热敏CTP 系统的最佳工作参数。
英文摘要:
      Exposure parameter and developing temperature optimization experiments were carried out using orthogonal experimental design method, combining with practical application, and selecting the main parameters affecting platemaking quality, which were laser power, developing temperature, and developing time. The experimental results showed that, among various factors, laser power has the greatest impact on plate making quality of thermal CTP system, followed by developing temperature and developing speed. Best operating parameters of an experimental thermal CTP system was obtained.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20796519位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号