文章摘要
尉晓丽,傅和青.聚氨酯-环氧双重改性丙烯酸酯乳液及其压敏胶的研究[J].包装工程,2013,34(13):71-76,105.
WEI Xiao-li,FU He-qing.Polyurethane-epoxy Modified Acrylate Emulsion and Its Pressure Sensitive Adhesive[J].Packaging Engineering,2013,34(13):71-76,105.
聚氨酯-环氧双重改性丙烯酸酯乳液及其压敏胶的研究
Polyurethane-epoxy Modified Acrylate Emulsion and Its Pressure Sensitive Adhesive
投稿时间:2012-08-03  修订日期:2013-07-10
DOI:
中文关键词: 环氧树脂  聚氨酯  丙烯酸酯乳液  压敏胶
英文关键词: epoxy  polyurethane  acrylate emulsion  pressure-sensitive adhesive
基金项目:中山市科技局资助课题(2010cxy009)
作者单位
尉晓丽 华南理工大学, 广州 510640 
傅和青 华南理工大学, 广州 510640 
摘要点击次数:
全文下载次数:
中文摘要:
      以不饱和 C C 键封端的聚氨酯预聚体(PU)和环氧树脂来改性丙烯酸酯,通过两步接枝共聚合成聚氨酯-环氧复合改性的丙烯酸酯(PUEA)水性压敏胶(PSA)。 通过差示扫描量热(DSC)和透射电镜(TEM)分析发现,改性后的共聚物为一均相体系,组分间未发生相分离。 研究了 PU 加入量和聚合工艺对乳液性能的影响,结果表明,改性后 PUEA 的粘接性、耐高温性有明显提高,当 PU 加入量为 6% 时 PSA 乳液的综合性能较佳;采用化学共聚所得共聚物比物理共混所得乳液的稳定性、粘接性和耐高温性有显著提高。
英文摘要:
      Polyurethane-epoxy-acrylate copolymers (PUEA) used as waterborne pressure-sensitive adhesives (PSA) were synthesized by a two-step copolymerization of acrylates with unsaturated double bound terminated polyurethane (PU) and epoxy resin. DSC and TEM analysis indicated that the modified copolymer was a homogeneous system and there was no phase-separation between the components. The effects of additions of PU and polymerization processes on PUEA emulsion properties and adhesion performances were also studied. The experimental results showed that the pressure sensitive performances and high temperature resistance of modified PUEA were greatly improved. When the content of PU was 6% , the properties of PUA emulsion were good. The stability, adhesion performance, and temperature resistance of the emulsions by chemical copolymerization were better than those of physical blending.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20808686位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号