张肖庆,陆佳平,王艳菊,王雪芬.特定结构木塑托盘静态弯曲性能的研究[J].包装工程,2013,34(11):55-58,84.
ZHANG Xiao-qing,LU Jia-ping,WANG Yan-ju,WANG Xue-fen.Static Bending Performance of Specific Structure WPC Pallet[J].Packaging Engineering,2013,34(11):55-58,84. |
| 特定结构木塑托盘静态弯曲性能的研究 |
| Static Bending Performance of Specific Structure WPC Pallet |
| 投稿时间：2013-04-02 修订日期：2013-06-10 |
| DOI： |
| 中文关键词: 木塑托盘 静态弯曲 实验研究 模拟分析 |
| 英文关键词: WPC pallet static bending experimental research simulation analysis |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 以一款特定结构的木塑托盘为研究对象,基于托盘结构和连接方式两方面考虑,以托盘实验过程中的实际承载条件为依据,分析了其可能存在的失效模式,通过实验研究确定了其评价指标。 在 Ansys Workbench 环境下建立结构模型,对 2 种失效模式进行了模拟,分析了整体结构及螺栓连接在静态弯曲下的承载特性。 通过进一步分析比较,验证了材料结构的性能要求和设计的合理性。 |
| 英文摘要: |
| Specific WPC pallet was taken as an object of study. The possible failure modes of the pallet were analyzed considering the pallet structure and combination pattern. The evaluation indexes were determined through experimental study based on the actual bearing capacity. The structure models were established in Ansys Workbench environment and two failure modes were simulated. The bearing characteristic of over-all structure and bolted connection under static bending was analyzed. The performance of material and rationality of design was verified through further analysis. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
渝公网安备 50010702501716号