文章摘要
王华山,陈崸.纤维素 / 聚碳酸亚丙酯多元醇共混膜的包装性能研究[J].包装工程,2013,34(11):5-9.
WANG Hua-shan,CHEN Di.Preparation and Performance of Cellulose / PPC Blend Package Films[J].Packaging Engineering,2013,34(11):5-9.
纤维素 / 聚碳酸亚丙酯多元醇共混膜的包装性能研究
Preparation and Performance of Cellulose / PPC Blend Package Films
投稿时间:2013-04-03  修订日期:2013-06-10
DOI:
中文关键词: 纤维素  聚碳酸亚丙酯多元醇  共混膜  包装性能
英文关键词: cellulose  PPC  blend package film  packaging performance
基金项目:国家“十二五冶科技支撑计划项目(2012BAK25B00)
作者单位
王华山 天津科技大学, 天津 300457 
陈崸 天津科技大学, 天津 300457 
摘要点击次数:
全文下载次数:
中文摘要:
      用溶液铸膜工艺制备了纤维素 / 聚碳酸亚丙酯多元醇共混膜,以扫描电子显微镜、电子拉力机、差示量热扫描仪、透气透湿仪等试验仪器对共混膜进行了表征和性能测试。 研究表明:纤维素 / 聚碳酸亚丙酯多元醇共混膜的力学性能和透湿性能随聚碳酸亚丙酯多元醇含量的提高而提高,而透气性能则相反。 共混膜中聚碳酸亚丙酯多元醇含量为 30% 时共混膜的力学性能最好,共混膜中聚碳酸亚丙酯多元醇含量为 40% 时透湿性能最好,透气性能最差。
英文摘要:
      Cellulose / PPC blend Films were prepared by solution casting process. The performance of the blend films were characterized by DSC, SEM, mechanical tester, and air permeability tester. The results indicated that the mechanical properties and the moisture permeability of cellulose / PPC film increase with the contents of PPC while the air permeability decrease; the mechanical performance of the blend film is the best when the PPC is 30% . When the content of PPC is 40% , the wet permeability is the highest while the air permeability is the lowest.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21119231位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号