文章摘要
蒋新萍,王仪明.印刷机飞达动态特性实验研究[J].包装工程,2013,34(9):63-65,70.
JIANG Xin-ping,WANG Yi-ming.Experimental Study of Dynamic Characteristics Separator Head of Printing Machine[J].Packaging Engineering,2013,34(9):63-65,70.
印刷机飞达动态特性实验研究
Experimental Study of Dynamic Characteristics Separator Head of Printing Machine
投稿时间:2012-09-16  修订日期:2013-05-10
DOI:
中文关键词: 印刷机飞达  扭矩测试  振动测试
英文关键词: separator head of printing machine  torque test  vibration test
基金项目:
作者单位
蒋新萍 常州轻工职业技术学院, 常州 213164 
王仪明 北京印刷学院, 北京 102600 
摘要点击次数:
全文下载次数:
中文摘要:
      针对高速飞达工作时因动态特性差造成的输纸不稳问题,研制了飞达动态特性实验平台,并进行了实验研究。 利用实验平台对飞达凸轮分配轴进行了扭矩动态测试和振动测试,用 4 个压电加速度传感器分别测试了飞达机架、分纸吸嘴、递纸吸嘴、压脚的加速度。 研究表明:印刷机飞达主轴扭矩呈现周期性波动,且随着速度增加扭矩变化幅值增加;当速度由 10 000 张 / h 增加到 15 000 张 / h 时,加速度峰值增加 3 倍,飞达振动加剧;应优化凸轮曲线及封闭弹簧布局,降低飞达主轴扭矩波动,提高输纸稳定性。
英文摘要:
      Aiming at the feeding instability problem of high-speed printing machine caused by bad dynamic characteristics, an experimental device of dynamic characteristics was developed and some experimental investigations were conducted. The dynamic torque and vibration of CAM distribution shaft was tested using the experimental platform. The acceleration of separator head frame, lifting sacker, and delivery sacker, and pressing foot was tested using piezoelectric acceleration transducer. The result showed that shown that the torque of separator head changes periodically, and increases suddenly as speed increases; when the speed increases from 10000 s / h to 15 000 s / h, the peak of acceleration increases three times, and the vibration of separator head intensifies. It was concluded that cam curve and spring layout should be optimized, so as to reduce the variation of feeder cam shaft's torque and to improve the stability of paper transferring.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21151763位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号