张天才,王永凤,张凯,杨骐,刘孝会,王艳艳.DSC 法研究聚醚胺 / 酚醛胺-环氧树脂体系的固化行为[J].包装工程,2013,34(7):7-9,33. ZHANG Tian-cai,WANG Yong-feng,ZHANG Kai,YANG Qi,LIU Xiao-hui,WANG Yan-yan.Study on Curing Behavior of Polyether Amine/ Phenolic Amine-Epoxy Resin System with Differential Scanning Calorimertry[J].Packaging Engineering,2013,34(7):7-9,33. |
DSC 法研究聚醚胺 / 酚醛胺-环氧树脂体系的固化行为 |
Study on Curing Behavior of Polyether Amine/ Phenolic Amine-Epoxy Resin System with Differential Scanning Calorimertry |
投稿时间:2012-10-25 修订日期:2013-04-10 |
DOI: |
中文关键词: 环氧树脂 聚醚胺 / 酚醛胺 固化行为 差示扫描量热法 |
英文关键词: epoxy resin polyether amine / phenolic amine curing behavior differential scanning calorimetry |
基金项目:国家自然科学基金委员会— — —中国工程物理研究院联合基金资助(U1230129) |
|
摘要点击次数: |
全文下载次数: |
中文摘要: |
采用示差扫描量热法(DSC),在 25 ~ 230 ℃范围内以不同的升温速率(5,10,15, 20 ℃ / min),研究了以聚醚胺 / 酚醛胺为固化剂的环氧树脂体系的固化行为,对其不同升温速率下的固化度进行了分析,采用 T-β 外推法得出了该体系的起始固化温度、峰顶固化温度和终止固化温度等固化工艺参数。 |
英文摘要: |
Curing behavior of polyether amine / phenolic amine-epoxy resin system was studied using DSC at heating rates of 5, 10, 15 and 20 ℃ / min from 25 ℃ to 230 ℃ , and the curing states were analyzed in different heating rates. At last, initial curing temperature, maximum curing temperature, and terminal curing temperature were calculated by extrapolating T-β. |
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |
|
|
|