文章摘要
郝喜海,付翠霞,王会芬,卞喻,阳家菊.喷墨打印水转印过渡层的性能研究[J].包装工程,2013,34(5):103-106.
HAO Xi-hai,FU Cuixia,WANG Hui-fen,BIAN Yu,YANG Jia-ju.Performance Research on Transition Layer of Ink-jet Printing in Water Transfer Printing[J].Packaging Engineering,2013,34(5):103-106.
喷墨打印水转印过渡层的性能研究
Performance Research on Transition Layer of Ink-jet Printing in Water Transfer Printing
投稿时间:2012-12-21  修订日期:2013-03-10
DOI:
中文关键词: 硝化纤维  伸长率  丙烯酸树脂  纳米二氧化硅  接触角
英文关键词: nitrocellulose  elongation  acrylic resin  nano silica  initial contact angle
基金项目:
作者单位
郝喜海 1. 湖南工业大学 包装新材料与技术重点实验室, 株洲 412007
2. 湖南工业大学 包装与材料工程学院, 株洲 412007 
付翠霞 湖南工业大学 包装新材料与技术重点实验室, 株洲 412007 
王会芬 湖南工业大学 包装新材料与技术重点实验室, 株洲 412007 
卞喻 湖南工业大学 包装新材料与技术重点实验室, 株洲 412007 
阳家菊 湖南工业大学 包装新材料与技术重点实验室, 株洲 412007 
摘要点击次数:
全文下载次数:
中文摘要:
      实验研究了过渡层对喷墨打印水转印转印膜伸长率及转印效果的影响。 结果表明:水转印膜伸长率随着硝化纤维的增加、丙烯酸树脂的减少而减小;初始接触角随表面活性剂纳米二氧化硅的增加而减小,提高了过渡层对水性油墨的吸附性能。
英文摘要:
      Influence of the transition layer on elongation of water transfer printing film and transferring effect was investigated. The results showed that increasing the concentrations of nitrocellulose and decreasing the concentrations of acrylic resin can reduce the elongation; the initial contact angle is reduced by increasing nano silica in surfactant, which improve the adsorption performance of the transition layer of water-based ink.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20815487位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号