文章摘要
黄武龙,杨志军,郭景松,赵德宾.载荷和橡胶硬度对凹版印刷系统印刷力轴向分布的影响分析[J].包装工程,2013,34(3):39-43.
HUANG Wu-long,YANG Zhi-jun,GUO Jing-song,ZHAO De-bin.Effect Analysis of Rubber Hardness and External Load on Pressure Distribution of Gravure Printing System in Axial Direction[J].Packaging Engineering,2013,34(3):39-43.
载荷和橡胶硬度对凹版印刷系统印刷力轴向分布的影响分析
Effect Analysis of Rubber Hardness and External Load on Pressure Distribution of Gravure Printing System in Axial Direction
投稿时间:2012-10-23  修订日期:2013-02-10
DOI:
中文关键词: 印刷系统  橡胶硬度  印刷力  非均匀度
英文关键词: printing system  rubber hardness  printing pressure  non-evenness
基金项目:国家自然科学基金(U1134004, 50905033);973 项目(2011CB013100- G);广东省引进创新团队(201001G0104781202);教育部博士点基金(20094420120001);国家支撑计划(2012BAF12B10);广东省科技计划项目(2012B011300067);中山市产学研专项基金(2009CXY018)
作者单位
黄武龙 广东工业大学 广东省集成制造重点实验室, 广州 510006 
杨志军 广东工业大学 广东省集成制造重点实验室, 广州 510006 
郭景松 中山市松德包装印刷设备股份有限公司, 中山 528429 
赵德宾 中山市松德包装印刷设备股份有限公司, 中山 528429 
摘要点击次数:
全文下载次数:
中文摘要:
      在有限元分析软件 ABAQUS 环境下,通过对凹版印刷系统的静态接触分析,得出了印刷力沿着辊筒轴向的分布情况,并进一步对比分析了不同种组合工况下印刷力的分布情况,得出了同一辊筒结构中外载荷大小和橡胶硬度对印刷力分布的影响规律。 研究结果表明,外载荷越小,橡胶硬度越低,印刷力沿着轴向的分布就越均匀。
英文摘要:
      Static contact analysis of gravure printing system was carried out in the environment of finite element analysis software ABAQUS. The printing pressure distribution along the roller was obtained. Further contrasting the pressure distribution while the printing system was applied with different load conditions, the effects of external loads and rubber hardness in the same roller structure were acquired. The research results showed that the pressure distribution is more homogeneous when the external load is smaller and the rubber hardness is lower.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20814752位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号