文章摘要
陆荣鑑,韩 凌.基于ARM嵌入式的制袋机控制系统设计[J].包装工程,2012,33(17):88-93.
LU Rong-jian,HAN Ling.Design of Bag-making Machine Control System Based on ARM Embedded Technology[J].Packaging Engineering,2012,33(17):88-93.
基于ARM嵌入式的制袋机控制系统设计
Design of Bag-making Machine Control System Based on ARM Embedded Technology
投稿时间:2012-07-26  修订日期:2012-09-10
DOI:
中文关键词: 制袋机  伺服控制  变频控制  定位定长
英文关键词: bag-making machine  servo drive  frequency control  localization length
基金项目:南京科技支撑计划项目(200701069)
作者单位
陆荣鑑 南京林业大学 南京 210037 
韩 凌 南京林业大学 南京 210037 
摘要点击次数:
全文下载次数:
中文摘要:
      阐述了一种以ARM9内核处理器作为控制芯片的新型制袋机控制系统的设计方案。基于ARM9内核处理器可靠性高、数据处理能力强的特点,控制系统分解为2个独立的子系统:定长定位控制系统由单片机DSPIC、交流伺服驱动器及主电机组成;张力控制、光电纠偏各组成独立的子控制系统。实际运行的结果表明,该方案有效地提高了系统控制精度。相对于以PLC或工控机为控制核心的控制系统,以ARM9为核心的制袋机控制系统使生产线获得了更高的运行速度和更好的稳定性。
英文摘要:
      A design scheme of bag making machine control system by ARM core embedded processor was introduced. The control system was divided to two subsystems based on high reliability and powerful data processing ability of ARM core processor. Fixed length and position subsystem is composed with single chip microcomputer DSPIC, AC servo driver and main motor. Tension control and photoelectric rectification is another independent subsystem. The practical running results showed that the scheme effectively improve the precision of the control system; compared to those bag-making machine control system using PLC or industrial computer, the control system is faster, more precise and more stabile.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20810620位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号