文章摘要
沈丽燕,钱军浩.基于喷墨印刷的RFID标签天线性价比优化方法研究[J].包装工程,2012,33(15):121-124.
SHEN Li-yan,QIAN Jun-hao.Cost-effective Optimization of RFID Tag Antenna by Ink-jet Printing[J].Packaging Engineering,2012,33(15):121-124.
基于喷墨印刷的RFID标签天线性价比优化方法研究
Cost-effective Optimization of RFID Tag Antenna by Ink-jet Printing
投稿时间:2012-05-15  修订日期:2012-08-10
DOI:
中文关键词: 喷墨印刷  性价比  识别距离  油墨耗用量
英文关键词: ink-jet printing  cost-effective  read range  ink consumption
基金项目:
作者单位
沈丽燕 江南大学 无锡 214122 
钱军浩 江南大学 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以小型偶极子天线为研究对象,采用无选择和选择性2种不同的喷墨印刷方式印制,对比了2种印刷方式下天线的识别距离和油墨耗用量。实验证明,在表面电流密度较高处进行选择性印刷,以增加墨层厚度的方法,有利于降低喷墨印制无源超高频RFID标签天线的成本,性价比明显提高。
英文摘要:
      Small dipole antennas printed by full printing and selective printing were studied. The read range and ink consumption under the two conditions were compared. The results showed that the method of selective printing on the area of higher surface current density to increase ink layer thickness is propitious to reduce the cost of passive UHF RFID tag antenna and to improve its cost-effectiveness.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第21257817位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号