文章摘要
金张英,郑 亮,管雯珺.基于ISO 13660的数字印刷线条质量分析与评价[J].包装工程,2012,33(15):97-103.
JIN Zhang-ying,ZHENG Liang,GUAN Wen-jun.Line Quality Analysis and Evaluation of Digital Printing Based on ISO 13660[J].Packaging Engineering,2012,33(15):97-103.
基于ISO 13660的数字印刷线条质量分析与评价
Line Quality Analysis and Evaluation of Digital Printing Based on ISO 13660
投稿时间:2012-04-24  修订日期:2012-08-10
DOI:
中文关键词: 数字印刷  线条质量  ISO 13660
英文关键词: digital printing  line quality  ISO 13660
基金项目:上海市教育委员会科研创新项目(12YZ198)
作者单位
金张英 上海出版印刷高等专科学校 上海 200093 
郑 亮 上海出版印刷高等专科学校 上海 200093 
管雯珺 上海出版印刷高等专科学校 上海 200093 
摘要点击次数:
全文下载次数:
中文摘要:
      根据ISO 13660 标准建议的测量方法,使用基于扫描仪的数字印刷质量检测系统进行了线条印刷质量评价和分析。采用液体墨粉和固体墨粉的静电照相数字印刷机,分别在2种不同类型纸张上输出了数字印刷品作为测试样张。根据检测系统测得的数据,分别从线宽、粗糙度和模糊度等ISO 13660定义的线条和字符质量属性,分析和评估了2款数字印刷机输出的印刷品的线条质量。测量分析发现,由于2款数字印刷机在成像系统、结构设计和墨粉上的差异,使其线条质量上也存在差异。
英文摘要:
      According to ISO 13660, Line quality was analyzed and evaluated by using a digital printing quality measurement system based on a scanner. The test sheets were printed by two xerographic digital presses, one of which used liquid toner and the other used solid toner, on two types of paper respectively. The line quality of two digital presses was analyzed and evaluated in line width, raggedness, and blurriness, which are line and character attributes defined in ISO 13660. The measurement results showed that the line quality is different due to the difference of imaging system, structure design and toner used in the two digital presses.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20818082位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号