文章摘要
刘 乘,刘 勋,沈训乐.发泡聚丙烯本构模型在冲击试验仿真中的应用[J].包装工程,2012,33(15):40-43,47.
LIU Cheng,LIU Xun,SHEN Xun-le.Applications of EPP Constitutive Model in Impact Test Simulation[J].Packaging Engineering,2012,33(15):40-43,47.
发泡聚丙烯本构模型在冲击试验仿真中的应用
Applications of EPP Constitutive Model in Impact Test Simulation
投稿时间:2012-06-10  修订日期:2012-08-10
DOI:
中文关键词: 本构方程  发泡聚丙烯  缓冲设计  有限元分析
英文关键词: constitutive equation  expanded polypropylene  cushioning design  FEA
基金项目:
作者单位
刘 乘 陕西科技大学 西安 710021 
刘 勋 陕西科技大学 西安 710021 
沈训乐 无锡耐帆包装工程有限公司 无锡 201206 
摘要点击次数:
全文下载次数:
中文摘要:
      把静态压缩本构方程拟合得到的应力-应变数据作为缓冲材料的载荷曲线,利用有限元仿真软件ANSYS LS-DYNA对DY-3重锤冲击EPP材料进行了仿真,得到了响应加速度-时间曲线,并与试验曲线进行了对比,误差在6%以内,说明了利用本构方程拟合的应力-应变载荷曲线,既能克服将缓冲材料简化为线性材料导致的缺陷,又避免了需要通过试验获取载荷曲线的弊端。
英文摘要:
      EPP drop test by DY-3 test machine was simulated by using ANSYS LS-DYNA and loading curves from stress-strain data fitted by compression constitutive equation. Response acceleration-time curves were obtained and compared with experimental result. Comparison results showed that the error of simulation result is less than 10%, which means that the fitting data derived by static compression constitutive equation can not only overcome the inaccuracy of simplifying EPP as a linear material, but also avoid using experiment to obtain the loading curve.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20794520位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号