文章摘要
严 敏,陈安军.跌落工况下斜支承系统响应分析的变分迭代法[J].包装工程,2012,33(13):71-74,79.
YAN Min,CHEN An-jun.Variational Iteration Method for Response Analysis of Inclined Support Packaging System under Dropping Condition[J].Packaging Engineering,2012,33(13):71-74,79.
跌落工况下斜支承系统响应分析的变分迭代法
Variational Iteration Method for Response Analysis of Inclined Support Packaging System under Dropping Condition
投稿时间:2012-05-04  修订日期:2012-07-10
DOI:
中文关键词: 斜支承系统  数值解  变分迭代法  非线性
英文关键词: inclined support packaging system  numerical solution  variational iteration Method  nonlinear
基金项目:
作者单位
严 敏 江南大学 无锡214122 
陈安军 国家轻工业包装制品质量监督检测中心 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      以斜支承缓冲包装系统为研究对象,建立了跌落工况下系统的无量纲非线性动力学方程。应用变分迭代方法求解了系统动力学方程,得到了系统响应的近似解析表达式,并与龙格库塔数值解进行了比较。研究表明:跌落工况下斜支承系统响应频率相对误差小于0.3%,无量纲位移及加速度的响应最大值相对误差小于0.5%,且无量纲位移、加速度响应随支承角及跌落高度的变化趋势,与龙格库塔数值结果相同。变分迭代方法求解斜支承系统的跌落冲击问题,可以得到满意的结果。
英文摘要:
      Dimensionless nonlinear dynamical equations of inclined support packaging system under the condition of dropping were established. Variational iteration method was proposed to solve the equation, expressions of approximate solution were obtained, and the results were compared with that of Runge-Kutta numeric method. The results showed that response frequency error of inclined support packaging system under the condition of dropping is less than 0.3%; the error of the max dimensionless displacement and the max dimensionless acceleration is less than 0.5%; and variation trend with dropping height and support angle is the same with Runge-Kutta numeric method. It was concluded that it is valid to apply variational iteration method to solve the problem of inclined support packaging system under the condition of dropping.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20817375位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号