彭群英,李保国,顾小杰.集预冷杀菌多功能气调包装机的设计[J].包装工程,2012,33(13):22-25.
PENG Qun-ying,LI Bao-guo,GU Xiao-jie.Design of Multifunctional MAP Equipment Adding Pre-cooling and Sterilization Functions[J].Packaging Engineering,2012,33(13):22-25. |
| 集预冷杀菌多功能气调包装机的设计 |
| Design of Multifunctional MAP Equipment Adding Pre-cooling and Sterilization Functions |
| 投稿时间：2012-02-28 修订日期：2012-07-10 |
| DOI： |
| 中文关键词: 气调包装设备 杀菌 半导体制冷技术 真空预冷 |
| 英文关键词: MAP sterilization semiconductor refrigeration technology vacuum pre-cooling |
| 基金项目:上海市重点学科建设项目(S30503);上海市联盟计划项目；上海市农业成果转化项目(113919N0400);宝山区科学技术委员会产学研合作项目 |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 在集成预冷、杀菌、气调包装三功能基础上，对当前气调保鲜包装机一般为补偿式气调而置换率较低，基于压力配气方式而气体混合精度差，半自动化而生产效率低，冷却不到位并存在二次污染等问题进行了改进，设计了一种集预冷、杀菌、气调包装一体化的全自动设备。此外，就不同包装盒及不同产品所需冷量的不同，设计了2种预冷系统模式：将半导体制冷技术应用于预冷预置气体，适用于小型冷量的包装产品，并可相应地提高其配气精度；采用制冷压缩机真空预冷系统，适用于需较大冷量的包装产品。同时对制冷模式的选择及所需冷量进行了简单的理论计算和分析。 |
| 英文摘要: |
| Current MAP equipment has the deficiencies of low replacement rate caused by compensation style, low gas mixing precision caused by pressure regulation, low efficiency caused by half automation, not enough cooling and sterilization, and secondary pollution. Fully automatic MAP equipment with the functions of pre-cooling, sterilization, and modified atmosphere was designed to solve the above deficiencies. Besides, two pre-cooling system modes were designed for different packaging boxes and products requirements, which were semiconductor refrigeration technology applicable to small cold quantity packaging products and refrigeration compressor vacuum pre-cooling system applied in larger cold quantity. Refrigeration mode selection and theoretical calculation and analysis methods were also introduced. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号