文章摘要
陈海生.用于PE材料印刷的UV固化油墨的研制[J].包装工程,2012,33(11):97-100.
CHEN Hai-sheng.Development of UV Curable Ink Used on PE Materials[J].Packaging Engineering,2012,33(11):97-100.
用于PE材料印刷的UV固化油墨的研制
Development of UV Curable Ink Used on PE Materials
投稿时间:2012-03-16  修订日期:2012-06-10
DOI:
中文关键词: PE  UV油墨  固化时间  附着力  耐溶剂性
英文关键词: PE  UV curable ink  curing speed  adhesion  solvent resistance
基金项目:
作者单位
陈海生 中山火炬职业技术学院 中山 528436 
摘要点击次数:
全文下载次数:
中文摘要:
      研制了用于PE材料印刷的UV固化油墨,探讨了预聚物、活性单体、光引发剂对UV油墨的固化速度、附着力及耐溶剂性的影响,得出了油墨的最佳配方(以质量分数计)为:PUA 25%,PEA 25%,TMPTA 15%,NPGDA 15%,TPO 6%,炭黑8%,消泡剂3%,分散剂3%。按该配方配制的油墨,固化时间仅需8 s,附着力等级为3级,耐溶剂性能良好,是一种适宜于PE基材印刷的UV固化油墨。
英文摘要:
      UV curable ink used on PE materials was developed. The influence of prepolymer, monomer and photoinitiator on the UV ink properties such as curing speed, adhesion and solvent resistance were discussed. The optimum formulation of the UV curing ink was as follow: PUA is 25%, PEA is 25%, TMPTA is 15%, NPGDA is 15%, TPO is 5%, carbon soot is 12%, defoamer is 4%, and dispersant is 4%. Under this condition, the UV curing ink properties were as follow: curing time 8s, adhesion level 3 and good solvent resistance. It was concluded that the UV curing ink is suitable for printing on PE substrates.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20815676位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号