文章摘要
冀晓敏,焦利勇,柳雅军,李琳琳,马倩云.水性UV固化涂料用多羟甲基苯酚丙烯酸酯的合成[J].包装工程,2012,33(9):62-65,69.
JI Xiao-min,JIAO Li-yong,LIU Ya-jun,LI Lin-lin,MA Qian-yun.Synthesis of Multi-hydroxymethyl-phenol Acrylate for Waterborne UV Curing Coating[J].Packaging Engineering,2012,33(9):62-65,69.
水性UV固化涂料用多羟甲基苯酚丙烯酸酯的合成
Synthesis of Multi-hydroxymethyl-phenol Acrylate for Waterborne UV Curing Coating
投稿时间:2012-02-01  修订日期:2012-05-10
DOI:
中文关键词: 多羟甲基苯酚丙烯酸酯  水性  UV固化  涂料
英文关键词: multi-hydroxymethyl-phenol acrylate  waterborne  UV curing  coating
基金项目:
作者单位
冀晓敏 大连工业大学, 大连 116034 
焦利勇 1.大连工业大学, 大连 116034
2.大连理工大学 大连 116012 
柳雅军 大连工业大学, 大连 116034 
李琳琳 大连工业大学, 大连 116034 
马倩云 大连工业大学, 大连 116034 
摘要点击次数:
全文下载次数:
中文摘要:
      以多羟甲基苯酚钠和丙烯酰氯为原料,合成了适用于水性UV固化涂料的多羟甲基苯酚丙烯酸酯,通过红外光谱表征了产物的化学结构。探讨了物料比、反应温度、反应时间和催化剂用量等因素对产物产率的影响,结果表明:当n(多羟甲基苯酚钠)∶n(丙烯酰氯)=1∶2、反应温度为0~-5 ℃、反应时间为2.5 h、催化剂四丁基溴化铵用量为0.04%(占物料质量比)时,最有利于产物的合成;多羟甲基苯酚丙烯酸酯的水溶性及涂膜性能,也能较好地满足水性UV固化涂料的应用。
英文摘要:
      Multi-hydroxymethyl-phenol acrylate which is suitable for waterborne UV curing coating was synthesized by using multi-hydroxymethyl phenol sodium and acryloyl chloride as raw material. Chemical structure of the product was characterized by FT-IR. The relation between the production yield and material ratio, reaction temperature, reaction time and catalyst content was discussed. The results showed that the most favorable reaction condition is when n(multihydroxymethyl phenol sodium)∶n(acryloyl chloride)=1∶2, reaction temperature at 0~- 5℃, reaction time 2.5 h, the content of tetrabutyl ammonium bromide 0.04%(accounting for materials quality ratio); water-soluble and film properties of the multi-hydroxymethyl-phenol acrylate can satisfy the application of waterborne UV curing coating.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20799537位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号