文章摘要
冯 涛,苏 彬,刘 斌,黎亚军,李知微,王 晶.泡沫材料厚度对其刚度及阻尼系数的影响[J].包装工程,2012,33(9):37-40,53.
FENG Tao,SU Bin,LIU Bin,LI Ya-jun,LI Zhi-wei,WANG Jing.Experimental Research of Influences of Foam Material Thickness on Its Stiffness and Damping Coefficient[J].Packaging Engineering,2012,33(9):37-40,53.
泡沫材料厚度对其刚度及阻尼系数的影响
Experimental Research of Influences of Foam Material Thickness on Its Stiffness and Damping Coefficient
投稿时间:2012-02-13  修订日期:2012-05-10
DOI:
中文关键词: 泡沫材料  刚度  阻尼系数  振动传递比
英文关键词: foam material  stiffness  damping coefficient  vibration transfer ratio
基金项目:国家自然科学基金(10974217);北京市教委科技发展面上项目(科技教委201008新);北京市属高等学校人才强教计划资助项目(PHR201107110)
作者单位
冯 涛 北京工商大学 北京 100048 
苏 彬 北京工商大学 北京 100048 
刘 斌 北京工商大学 北京 100048 
黎亚军 北京工商大学 北京 100048 
李知微 北京工商大学 北京 100048 
王 晶 北京工商大学 北京 100048 
摘要点击次数:
全文下载次数:
中文摘要:
      根据隔振分析模型,建立了相应的实验测量系统,测量并分析了泡沫材料的刚度及阻尼系数。采用激振台对泡沫材料施加激励,由2个加速度计拾振,获得了由泡沫材料组成的缓冲包装系统的振动传递比曲线,应用非线性拟合方法计算得到了阻尼比,并求得了刚度和阻尼系数。实验结果表明:泡沫材料刚度随其厚度增加而递减,阻尼系数则在一定范围内随厚度增加而降低;泡沫材料厚度的增加会降低缓冲包装系统隔振的下限频率,在一定范围内越厚,隔振效果会越好,但当厚度超过了特定值,隔振效果反而有所下降。
英文摘要:
      The experimental system was established according to vibration isolation model; the stiffness and damping coefficient was measured and analyzed. The excitation was exerted by vibration excitation platform; the acceleration was measured by two accelerators and the vibration transfer ratio curve of the cushion packaging system including the foam material was measured; the damping ratio was obtained by applying nonlinear fitting method and then the stiffness and damping coefficient was calculated. The experimental results showed that the stiffness of the foam material descends with its thickness increase; damping coefficient also descends with its thickness increase in the specific scope; with the increase of thickness, the lower limit frequency of cushion packaging system decreases; the more the thickness of the foam material, the better the vibration isolation effectiveness in specific range; however, the vibration isolation effectiveness decreases when the thickness beyond specific value.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20811165位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号