文章摘要
赵艳冰,钱 静.基于ANSYS的温控包装圆柱体模型的建立[J].包装工程,2012,33(9):18-22.
ZHAO Yan-bing,QIAN Jing.Establishment of Cylinder Models for Temperature Control Packages Based on ANSYS[J].Packaging Engineering,2012,33(9):18-22.
基于ANSYS的温控包装圆柱体模型的建立
Establishment of Cylinder Models for Temperature Control Packages Based on ANSYS
投稿时间:2012-01-10  修订日期:2012-05-10
DOI:
中文关键词: 温控包装  圆柱体模型  ANSYS  保温时间
英文关键词: temperature control package  cylinder model  ANSYS  temperature holding time
基金项目:
作者单位
赵艳冰 江南大学 无锡 214122 
钱 静 江南大学 无锡 214122 
摘要点击次数:
全文下载次数:
中文摘要:
      为简化温控包装设计计算,对实际温控包装系统建立了不同的圆柱体模型。将实际温控包装箱尝试向不同圆柱体模型转化,使其设计方法更简便易行,借助ANSYS软件对其进行了热传递分析和数值模拟,利用转换模型的温控时间与实际温控系统的温控时间之间的相对误差,对各模型进行了筛选。结果表明,采用的圆柱体模型与原立方体温控包装箱的内体积、厚度相等时,最能真实反映实际保温箱的传热过程。为降低包装成本、优化温控包装设计方案提供了依据。
英文摘要:
      Several cylinder models were established to simplify the design of temperature control package. Real temperature control package was transfer to different cylinder models to simplify design. Thermal transfer analysis and simulation were carried out using ANSYS. The relative error of temperature control time between transfer models and real temperature control system were used to select the best cylinder model. The result showed that the one who's inside volume and thickness is equal with real cubic temperature control package can reflect the real heat transfer process best. The purpose was to provide reference for reducing cost and optimizing temperature control package design.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20788720位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号