陈少克.热成型机开合模机构的设计及运动仿真[J].包装工程,2012,33(3):67-71,98.
CHEN Shao-ke.Design and Motion Simulation of Mold Open-Closing Mechanism for Thermoforming Machine[J].Packaging Engineering,2012,33(3):67-71,98. |
| 热成型机开合模机构的设计及运动仿真 |
| Design and Motion Simulation of Mold Open-Closing Mechanism for Thermoforming Machine |
| 投稿时间：2011-10-31 修订日期：2012-02-10 |
| DOI： |
| 中文关键词: 热成型机 凸轮曲柄连杆机构 机构设计 运动仿真 |
| 英文关键词: thermoforming machine cam and crank-connection mechanism mechanism design motion simulation |
| 基金项目:国家科技型中小企业技术创新专项资金项目（11C26214403131）；广东省教育部产学研结合项目(2009B090300175) |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 通过对热成型机开合模机构工作原理的分析，设计了一种新的凸轮曲柄连杆开合模机构，同时对凸轮曲柄连杆开合模机构进行了运动学及动力学分析，给出了凸轮曲柄连杆开合模机构的位移、速度及加速度的设计方程和仿真曲线，验证了该凸轮曲柄连杆机构设计的合理性。 |
| 英文摘要: |
| A new cam and crank-connection open-closing mechanism was designed by analyzing of the operating principle. The kinematics and dynamics of cam and crank-connection mechanism was also analyzed. The design equation and simulation curve of displacement, velocity and acceleration for the cam and crank-connection open-closing mechanism were provided to verify the rationality of the mechanism design. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号