文章摘要
魏彩乔,王晓光.自动静电玻璃撒粉机设计[J].包装工程,2011,32(19):89-92.
WEI Cai-qiao,WANG Xiao-guang.Design of Automatic Electrostatic Glass Duster[J].Packaging Engineering,2011,32(19):89-92.
自动静电玻璃撒粉机设计
Design of Automatic Electrostatic Glass Duster
投稿时间:2011-07-02  修订日期:2011-10-10
DOI:
中文关键词: 撒粉机  PLC  变频器
英文关键词: glass duster  PLC  frequency converter
基金项目:
作者单位
魏彩乔 北华航天工业学院 廊坊 065000 
王晓光 北华航天工业学院 廊坊 065000 
摘要点击次数:
全文下载次数:
中文摘要:
      为防止玻璃在储运过程中发霉,在玻璃之间需要撒一层防霉隔离粉。自动静电玻璃撒粉机实现了在线撒粉,可根据玻璃传输速度自动调整撒粉量,利用静电技术使撒粉均匀,附着力强。设计了以s7-200 PLC为基础的控制系统,重点介绍了控制系统的硬件配置、输入输出点分配和软件设计。测试表明:撒粉量为0.4~1.8 g/m2时,85%的粉附着于玻璃,满足玻璃的储运要求。
英文摘要:
      In order to prevent the glass from mildewing in storage and transportation, anti-mildew powder should be added between the glasses. The automatic electrostatic glass duster realized online powder spraying; the spraying rate varied depending on the transmission speed of glass. The homogeneity of powder and the adsorption force was improved by electrostatic technology. The control system based on s7-200 PLC was designed; the hardware configuration of the control system, distribution of input-output points and software design were discussed. The test results showed that the dusting amounts are between 0.4~1.6 grams per square meter; about 85% of powder can adsorb on glass; system function and accuracy can meet the needs of safe storage and transportation completely.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20810180位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号