郑 霞,徐剑莹.不同热压方法对无胶烟秆碎料板力学性能的影响[J].包装工程,2011,32(17):41-43,59.
ZHENG Xia,XU Jian-ying.Effect of Hot-pressing Method on Mechanical Properties of Tobacco Stem Binderless Particleboard[J].Packaging Engineering,2011,32(17):41-43,59. |
| 不同热压方法对无胶烟秆碎料板力学性能的影响 |
| Effect of Hot-pressing Method on Mechanical Properties of Tobacco Stem Binderless Particleboard |
| 投稿时间：2011-06-08 修订日期：2011-09-10 |
| DOI： |
| 中文关键词: 烟秆 无胶碎料板 普通热压 喷蒸热压 力学性能 |
| 英文关键词: tobacco stem binderless particleboard ordinary hot-pressing steam injection hot-pressing mechanical properties |
| 基金项目:国家林业局948项目（2011-4-22）；国家自然科学基金项目（30771681） |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 分别采用普通热压和喷蒸热压2种热压方法制备了无胶烟秆碎料板，对它们的物理力学性能进行了对比研究与分析。结果发现，与普通热压法相比，喷蒸热压法制备的无胶烟秆碎料板的静曲强度、弹性模量与内结合强度明显提高，吸水厚度膨胀率显著减小，其原因可能是不同热压过程中烟秆碎料发生了化学变化。 |
| 英文摘要: |
| Tobacco stem binderless particleboard was prepared by ordinary hot-pressing and steam injection hot-pressing respectively, and mechanical properties of particleboard with different hot-pressing method was studied and analyzed. The results showed that, compared with ordinary hot-pressing, MOR, MOE and IB of the tobacco stem binderless particleboard with steam injection hot-pressing increased significantly; TS decreased significantly. The possible reason was that chemical changes of tobacco stem particles with different Hot-pressing method were different. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号