潘光华.轻型环保陶瓷网纹辊的研究与实践[J].包装工程,2011,32(13):93-96.
PAN Guang-hua.Research and Development of Light Environmental Friendly Ceramic Anilox Roller[J].Packaging Engineering,2011,32(13):93-96. |
| 轻型环保陶瓷网纹辊的研究与实践 |
| Research and Development of Light Environmental Friendly Ceramic Anilox Roller |
| 投稿时间：2011-03-29 修订日期：2011-07-10 |
| DOI： |
| 中文关键词: 网纹辊 网穴 陶瓷处理 |
| 英文关键词: anilox roller ink cell ceramic processing |
| 基金项目: |
|
| 摘要点击次数: |
| 全文下载次数: |
| 中文摘要: |
| 以较轻的铝合金为网纹辊材料，分析了网纹辊网穴参数及网穴雕刻与表面陶瓷处理技术，经过反复变换网纹辊网穴雕刻及陶瓷处理方法，总结出了铝合金表面可行的网穴雕刻及陶瓷处理工艺，研究出了轻型环保陶瓷网纹辊的制作工艺流程。 |
| 英文摘要: |
| Light aluminum alloy was used to make anilox roller. The ink cell parameters, ink cell engraving and ceramic processing technology on the surface of anilox roller were analyzed. A reasonably practicable ink cell engraving and ceramic processing technology on the surface of aluminum alloy was developed after repeated experiments. Process flow for manufacturing of light environmental friendly ceramic anilox roller was developed. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
渝公网安备 50010702501716号