文章摘要
李建平,张跃明,李太亮.基于PIC单片机的胶印机墨斗电机控制系统设计[J].包装工程,2011,32(3):63-66,102.
LI Jian-ping,ZHANG Yue-ming,LI Tai-liang.Design of Motor Control System for Inking System of Four-color Offset Press Based on PIC Microcontroller[J].Packaging Engineering,2011,32(3):63-66,102.
基于PIC单片机的胶印机墨斗电机控制系统设计
Design of Motor Control System for Inking System of Four-color Offset Press Based on PIC Microcontroller
投稿时间:2010-11-16  修订日期:2011-02-10
DOI:
中文关键词: 直流电动机  闭环控制  CAN总线  PWM调速
英文关键词: DC motor  closed loop control  CAN bus  PWM motor speed regulation
基金项目:
作者单位
李建平 北京工业大学 北京 100124 
张跃明 北京工业大学 北京 100124 
李太亮 北京工业大学 北京 100124 
摘要点击次数:
全文下载次数:
中文摘要:
      以四色胶印机墨斗为平台,以PIC18F2580单片机为控制核心,设计了一套完整的直流电机闭环调速控制系统。详细设计了系统硬件电路,着重设计了与操作台和PC机通讯的CAN通讯接口电路、电机控制与驱动电路、电机位置闭环反馈电路和电机PWM调速电路,编写了系统的C语言驱动程序。经实验和实际环境下的运行证明,该系统具有良好的驱动性能、调速性能和抗电磁干扰性能,有利于降低成本,有利于国产胶印机的自动化、智能化进程,有良好的市场应用前景。
英文摘要:
      The DC motor control system with closed loop and speed regulation was designed with PIC18F2580 microcontroller as control unit for inking system of four-color offset press as basement. The circuit was designed in details. CAN bus interface circuit for communication to the console panel and PC, motor control and drive circuit, closed loop motor location feedback circuit, and PWM motor speed regulation circuit were designed with emphasis. The system software was compiled with C language. Experiment and actual operation showed that the system performs good driving performance, speed regulation and anti-electromagnetic interference performance. It can reduce costs and accelerate the automation and intelligent process of domestic offset. It has good market prospects.
查看全文   查看/发表评论  下载PDF阅读器
关闭

关于我们 | 联系我们 | 投诉建议 | 隐私保护 | 用户协议

您是第20814617位访问者    渝ICP备15012534号-2

版权所有:《包装工程》编辑部 2014 All Rights Reserved

邮编:400039 电话:023-68795652 Email: designartj@126.com

    

渝公网安备 50010702501716号